What device are you manufacturing?

Stage of Application : Early DesignPrototypeProduction

What kind of product do you prefer? : One ComponentTwo ComponentOther

BondingCoatingSealingPotting/ Encapsulation/ Casting

Bonding/ Sealing Application:

What substrates do you wish to bond? (Please specify the name of the plastic/ rubber/ metal or any other material that you are bonding)

What are the dimensions of the substrates that you are bonding?

What is the bonding area? (Area over which the adhesive will be applied)

Coating Application:

What substrates do you wish to coat? (Please specify the name of the plastic/ rubber/ metal or any other material that you are coating)

What is the principal reason for coating the substrates?

What are the dimensions of the substrates that you are coating?

How thick of a coating layer will you apply?

Potting Application:

What housing substrate do you wish to pot in? (Please specify the name of the plastic/ rubber/ metal or any other material that you are potting in)

What other substrates do you need adhesion to?

What are the dimensions of the housing for potting? (L x W x D or Dia x Depth)

What percent (%) of the housing substrate is occupied by other components?

What are the minimum and maximum temperatures that the adhesive will be exposed to during service?

How many thermal cycles will the adhesive be exposed to?

How long will the adhesive be exposed to the extreme temperatures? (dwell time)

What are the ramp speeds?

What are the normal operative temperatures?

What mechanical forces would be acting on the adhesives? (Indicate quantity if possible. If not, indicate magnitude whether they would be high or low)

Pressure or Load (Tensile/ Compression/ Shear)

Will the adhesive be exposed to any chemicals? (Please specify the chemicals)

How will the exposure to the chemicals take place? (Continuous immersion/ vapor/ splash)

What is the percent (%) concentration of the chemicals involved?

How long at a time will the adhesive be exposed to these chemicals?

How many times will the adhesive be exposed to these chemicals?

At what temperature will the adhesive be exposed to these chemicals?

Do you require the adhesive to be (Please quantify wherever possible) :

Thermally ConductiveElectrically InsulatingElectrically Conductive

Do you require optical clarity? YesNo

If yes, what wave length do you require optical clarity in?

Do you have any specific refractive index requirement?

If not, do you have any other color preference?

Low out gassing: GenericNASA Standards (ASTM E - 595)

Food Grade: FDA 175.105FDA 175.300

USP Class VI:

Type of Sterilization

Repeated Sterilization YesNo

If yes, how many?

Flame Retardancy: UL 94V - OFAR 25.853 A

What kind of viscosity are you looking for? (Please provide specific values in cps or indicate whether you prefer a non-drip paste/ high/ medium/ low viscosity)

Can you add heat for curing? If yes, what is the maximum temperature up to which you can add heat for curing?

What is the mode of application for the adhesive?

Would you like the adhesive to cure rigid or flexible? (Please specify the Shore (A or D) hardness value)

What kind of working life (pot life) do you prefer?

What kind of cure time do you prefer?

What other products have you tried using for this application?

Please specify the problems associated with the products tried:

What was the percent (%) failure?

How long have you been using this product?

Please provide any additional details or pictures that will assist us in choosing a suitable solution for your application:

Attach file: