All Products
-
KB 1600 FR-V – Two Component: Flame Retardant Epoxy System Capable Of Passing FAR Standard.
Read moreKohesi Bond KB 1600 FR-V is a two component epoxy system that offers a convenient to use mix ratio of 1:1 by weight. This flame retardant epoxy is capable of passing the vertical burn test specifications as per Amendment 25-116 and Part 25 Appendix F of the FAR standards.
-
KB 1458 TC – Two Component: Unique Epoxy System Offering Extremely Low Thermal Resistance.
Read moreKohesi Bond KB 1458 TC is a one-of-a-kind, two component, thermal management epoxy system. Firstly, this product offers phenomenal heat transfer capabilities. This products has very low thermal resistance and can be applied in layers as thin as 10 microns.
-
KB 1452 HT-2AO – Two Component: Room Temperature Curing, Thermally Conductive Epoxy System.
Read moreKohesi Bond KB 1452 HT-2AO is an exclusive two component epoxy system suitable for bonding, sealing, coating, potting and encapsulation applications. It has a favorable 100:40 (Part A: Part B) mix ratio by weight. Remarkably, it offers excellent thermal conductivity and an extremely low coefficient of thermal expansion (CTE). The optimal cure schedule is an overnight room temperature set-up followed by a heat cure at 70°C – 90°C for 3 – 5 hours.
-
KB 1372-AO – Two Component: Thermally Conductive And Chemically Resistant Epoxy System.
Read moreKohesi Bond KB 1372-AO is a two component, heat curing epoxy system suitable for bonding, sealing, and coating. It has a convenient 10:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable\y high glass transition temperature (Tg) of > 172°C.
-
KB 1372 LP – Two Component: Chemically Resistant Epoxy System For High Temperature Applications.
Read moreKohesi Bond KB 1372 LP is a two component, heat curing epoxy system suitable for bonding, sealing, coating and encapsulation. It has a favorable 100:25 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1040 AOHT – Two Component: Room Temperature Curing Epoxy System Offering Excellent Thermal Conductivity.
Read moreKohesi Bond KB 1040 AOHT is an exclusive two component epoxy system suitable for bonding, sealing, coating, potting and encapsulation applications. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers excellent thermal conductivity and an extremely low coefficient of thermal expansion (CTE).
-
TUF 1621 AOHT – Two Component: Toughened, Epoxy System For Bonding And Sealing.
Read moreKohesi Bond TUF 1621 AOHT is a two component, room temperature curing epoxy system suitable for bonding and sealing. It is capable of passing NASA standards for low outgassing (ASTM E-595) and has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. This unique epoxy system offers remarkable toughness and superior peel strength.
-
TUF 1452 HT-2 – Two Component: Toughened, Epoxy System For Bonding, Sealing, Coating, And Potting.
Read moreKohesi Bond TUF 1452 HT-2 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 100:40 (Part A: Part B) mix ratio by weight or 100:50 (Part A: Part B) mix ratio by volume. This unique epoxy system offers remarkable adhesion to wide variety of substrates including metals, ceramics, most plastics and glass.
-
KB 10473 FLAO – Two Component: Room Temperature Curing Epoxy System With Exceptional Flexibility.
Read moreKohesi Bond KB 10473 FLAO is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable flexibility and peel strength.
-
KB 10473 FL – Two Component: Room Temperature Curin Epoxy System With Exceptional Flexibility.
Read moreKohesi Bond KB 10473 FL is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable flexibility and peel strength. It readily cures at room temperature and can achieve faster cures at elevated temperatures.
-
KB 1689 – Two Component: Silver Coated Nickel Filled, Electrically Conductive Epoxy System.
Read moreKohesi Bond KB 1689 is a two component, toughened, silver coated nickel filled epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. Firstly, it offers very good electrical conductivity and very low shrinkage upon cure.
-
KB 1686 M – Two Component: Nickel Filled, Electrically Conductive Epoxy System For Bonding And Sealing.
Read moreKohesi Bond KB 1686 M is a two component, nickel filled epoxy system suitable for bonding, coating and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. Firstly, it offers very good electrical conductivity and dimensional stability.
-
KB 1631 AOLV-1 – Two Component: Room Temperature Curing Epoxy System For Bonding, Sealing, And Potting.
Read moreKohesi Bond KB 1631 AOLV-1 is a two component epoxy system suitable for bonding, sealing, coating, potting and encapsulation applications. It offers a favorable one to one mix ratio by weight or volume. In addition, it has a long open time, a low exotherm and good flow properties when mixed, making it ideal for potting and encapsulating. This epoxy system readily cures at room temperature and can achieve faster cures at elevated temperatures.
-
KB 1631 ANHT – Two Component: Thermally Conductive Epoxy System For Bonding, Sealing And Coating.
Read moreKohesi Bond KB 1631 ANHT is a two component, room temperature epoxy system suitable for bonding, sealing and coating. It has a very convenient 1:1 (Part A: Part B) mix ratio by weight or volume. Primarily, it offers stellar thermal conductivity, making it ideal for heat transfer applications. This epoxy system readily cures at room temperature and can achieve faster cures at elevated temperatures.
-
KB 1372-LO – Two Component: Chemically Resistant Epoxy System For Bonding, Sealing And Coating.
Read moreKohesi Bond KB 1372-LO is a two component, room heat curing epoxy system suitable for bonding, sealing, and coating. It has a convenient 10:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable\y high glass transition temperature (Tg) of > 172°C. It rapidly cures at moderately elevated temperatures and can achieve even faster cures at higher temperatures.
-
KB 1085-1 – Two Component: Graphite Filled, Electrically Conductive Epoxy System For Bonding And Sealing.
Read moreKohesi Bond KB 1085-1 is a two component, graphite filled epoxy system suitable for bonding, sealing and coating. It has a favorable 100:15 (Part A: Part B) mix ratio by weight. Firstly, it offers very good electrical conductivity and a outstanding dimensional stability.
-
KB 1048 – Two Component: Epoxy System For Bonding, Sealing, Coating, And Potting Applications.
Read moreKohesi Bond KB 1048 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 1:0.33 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, glass, ceramics, most plastics and rubbers.
-
KB 1040 – Two Component: Room Temperature Curing Epoxy System With Superior Optical Clarity.
Read moreKohesi Bond KB 1040 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, glass, ceramics, most plastics and rubbers.
-
KB 1040 QF – Two Component: Room Temperature Curing, Quartz Filled Epoxy System.
Read moreKohesi Bond KB 1040 QF is a two component, room temperature curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique quartz filled epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1040 P – Two Component: Room Temperature Curing Epoxy System With Exceptional Bonding To Plastics.
Read moreKohesi Bond KB 1040 P is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to plastics like polycarbonates and acrylics among others without any stress cracking.
-
KB 1040 CTE LO – Two Component: Room Temperature Curing Epoxy System Offering Very Low CTE.
Read moreKohesi Bond KB 1040 CTE-LO is an exclusive two component epoxy system suitable for bonding, sealing, coating and encapsulation applications. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers extremely low coefficient of thermal expansion (CTE) and is capable of passing NASA low outgassing test.
-
KB 1040 AN-1 – Two Component: Room Temperature Curing, Thermally Conductive Epoxy System.
Read moreKohesi Bond KB 1040 AN-1 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers stellar thermal conductivity and is capable of passing NASA low outgassing test.
-
KB 1039 CRLP AO – Two Component: Thermally Conductive Epoxy System For Cryogenic Applications.
Read moreKohesi Bond KB 1039 CRLP-AO is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1039 CRLP – Two Component: Optically Clear Epoxy System For Cryogenic Applications.
Read moreKohesi Bond KB 1039 CRLP is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1031 SPLV-6 – Two Component: Low Viscosity Epoxy For Bonding, Coating, Sealing, And Encapsulating.
Read moreKohesi Bond KB 1031 SPLV-6 is a two component epoxy system for bonding, sealing, coating and encapsulating. It has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. This high performance specialty product offers a unique combination of low viscosity, low exotherm and very long working life.
-
KB 1031 AT S – Two Component: Silver-Filled Cryogenically Serviceable Epoxy System.
Read moreKohesi Bond KB 1031 AT-S is a two component, silver filled, electrically conductive epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. It offers unprecedentedly low volume resistivity (< 10-3 ohm-cm) and remarkably high thermal conductivity.
-
KB 1031 ATHT-LO – Two Component: Toughened Epoxy System For Bonding, Sealing And Coating.
Read moreKohesi Bond KB 1031 ATHT-LO is a two component, highly toughened epoxy system suitable for bonding, sealing and coating applications. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers excellent peel strength and is capable of passing NASA low outgassing test.
-
KB 1031 ATFL-N – Two Component: Nickel Filled Electrically Conductive Epoxy System For Bonding And Sealing.
Read moreKohesi Bond KB 1031 ATFL-N is a two component, highly flexibilized, nickel filled epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. Firstly, it offers very good electrical conductivity and a first-rate peel strength.
-
KB 1031 AT-2LO – Two Component: Cryogenically Serviceable And Strikingly Flexibilized Epoxy System.
Read moreKB 1031 AT-2LO can withstand severe thermal shocks and cycling even at cryogenic temperatures. It offers an extensive serviceable temperature range of 4K (-269.15°C) to +120°C. It is a phenomenal adhesive that fosters outstanding physical strength properties and yet consolidates high peel strength and elongation.
-
TUF 1828 TC – One Component: Toughened Epoxy System Offering Extremely Low Thermal Resistance.
Read moreKohesi Bond TUF 1828 TC is a toughened, single component, thermal management epoxy system that offers an unlimited working life at room temperature.
-
TUF 1820 ANHT – One Component Toughened, High Strength Epoxy System For Bonding And Sealing.
Read moreKohesi Bond TUF 1820 ANHT is a toughened, single component epoxy system that offers phenomenal thermal conductivity while maintaining its superior electrical insulation properties. It requires no mixing and offers an unlimited working life at room temperature.
-
TUF 1613 HT-SM – One Component: Heat Curing, Toughened Epoxy System For Surface Mount Applications.
Read moreKohesi Bond TUF 1613 HT-SM is a true single component system that requires no mixing and cures hard at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at higher temperatures.
-
TUF 1613 HT-GT – One Component: Toughened Epoxy System For Glob Top Applications.
Read moreKohesi Bond TUF 1613 HT-GT is a single component, toughened epoxy system that requires no mixing and cures rapidly at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at elevated temperatures.
-
TUF 1613 HT-CM – One Component: Toughened Epoxy System For Surface Mount Applications.
Read moreKohesi Bond TUF 1613 HT-CM is a toughened, single component system that requires no mixing and cures readily at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at higher temperatures.
-
KB 1613 RLV – One Component: Low Viscosity Epoxy For Underfill & Potting Applications.
Read moreKohesi Bond KB 1613 RLV is a true single component system that requires no mixing and cures hard at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures extraordinarily fast), it can achieve even faster cures at elevated temperatures.
-
KB 1613 R80 – One Component: Rapid Curing Epoxy For Bonding, Sealing & Potting Applications.
Read moreKohesi Bond KB 1613 R80 is a single component epoxy system suitable for bonding, sealing, potting and encapsulation applications. Being a one component system, it does not require any mixing and offers an unlimited working life at room temperature.
-
KB 1427 HT-3 – One Component: Rapid Curing Epoxy System.
Read moreThis product’s unlikely low exotherm makes it ideal for use in potting up to 1/4 inch thicknesses. Being a one component system, it requires no mixing and provides ease of application. This epoxy system will not set-up unless heated above 100°C.
-
KB-SS-G – One Component: Graphite Filled, Electrically Conductive Sodium Silicate Based System.
Read moreKohesi Bond KB-SS-G is a graphite filled, sodium silicate based coating system. Firstly, this product offers very good electrical conductivity. This products offers high levels of shielding towards electromagnetic interference (EMI) and radio frequency interference (RFI), along with cost effectiveness.
-
KB SS SCN – One Component: Silver Coated Nickel Filled, Electrically Conductive Sodium Silicate Based System.
Read moreKohesi Bond KB-SS-SCN is a silver coated nickel filled, sodium silicate based coating system. Firstly, this product offers very good electrical conductivity. This products offers very high levels of shielding towards electromagnetic interference (EMI) and radio frequency interference (RFI), along with cost effectiveness.
-
KB SS SIL – One Component: Silver-Filled, Electrically Conductive Sodium Silicate-Based Coating System.
Read moreKohesi Bond KB-SS-SIL is a silver filled, sodium silicate based coating system. Firstly, this product offers phenomenal electrical conductivity. This products offers the highest level of shielding towards electromagnetic interference (EMI) and radio frequency interference (RFI).
-
KB 1631 HTC-1 – Two Component: Cryogenically Serviceable Epoxy System For Bonding And Sealing.
Read moreKB 1631 HTC-1 is a high performance two part epoxy suitable for bonding and sealing applications. This products offers stellar thermal conductivity of 1.5 – 1.6 W/m/K, it is cryogenically serviceable and it is capable of passing NASA standards for low outgassing (ASTM E-595).
-
KB 1631 FR-2 – Two Component: Flame Retardant Epoxy For Potting And Encapsulating.
Read moreKB 1631 FR-2 is an easy to use two component system, suitable for potting, encapsulation and casting applications. This product’s noteworthy features are its capability of passing UL 94 V-0 testing, its low smoke generation and that it contains a non-halogenated filler.
-
KB 1452 HT-2 – Two component: Room Temperature Curing Epoxy System For Medical Applications.
Read moreKB 1452 HT-2 is a two part system suitable for bonding, sealing, coating, potting and encapsulation applications. Its unique capability of passing USP Class VI testing makes it ideal for use in the medical industry. It can withstand repeated cycles of medical sterilization.
-
KB 1151 S-1 – Two Component: Chemically Resistant Epoxy System Bonding, Sealing, Coating And Potting.
Read moreKB 1151 S-1 is a two component, room temperature curing epoxy system suitable for bonding sealing and coating applications. It offers outstanding chemical resistance, particularly to fuels, solvents and alcohols.
-
KB 1040-2 – Two Component: Low Viscosity, Optically Clear, Room Temperature Curing, Epoxy System.
Read moreKB 1040-2 is a low viscosity, optically clear epoxy system that cures readily at room temperature. In addition, it is capable of passing NASA standards for low outgassing (ASTM E-595). Also, it offers excellent resistance to a variety of acids, bases, oils, fuels and water.
-
TUF 1820 HTS – One Component: Toughened, Electrically Conductive Epoxy System.
Read moreTUF 1820HTS is a silver filled, single component, heat curing epoxy system. It offers excellent electrical conductivity (volume resistivity of < 0.005 ohm-cm). Also, this product is cryogenically serviceable.
-
TUF 1613 HT-DA – One Component: Toughened Epoxy System For Die Attach Applications.
Read moreTUF 1613 HT-DA is a true one part system that is specially formulated for die attach applications. It has an ideal dispensing profile with no tailing. In addition to superior electrical insulation, it also offers phenomenal thermal conductivity of 1.4 – 1.5 W/m/K.
-
KB 1427 HT – One Component: Chemically Resistant Epoxy For Bonding, Coating, Sealing & Casting.
Read moreKB 1427 HT is a path-breaking one part epoxy used for bonding, sealing, coating and casting applications. It offers a roaring glass transition temperature Tg of 220°C – 230°C and stellar chemical resistance to a wide variety of fuels, oil and water.
-
TUF 1820 AOHT – One Component: Toughened, High Strength Epoxy System For Bonding & Sealing.
Read moreTUF 1820 AOHT is a toughened single component system that offers very good thermal conductivity and it is cryogenically serviceable. Owing to its stunning mechanical strength properties (tensile lap shear strength of > 3,800 psi), it is commonly used for bonding and sealing applications.
-
KB 1613 HT – One Component: Heat Curing Epoxy System For Bonding, Sealing & Coating.
Read moreKB 1613 HT is a one component heat curing epoxy system, that is typically used for bonding, sealing and coating applications. It offers rapid cures at elevated temperatures (5 – 10 minutes at 150°C) as well as outstanding physical strength properties.
Showing the single result
-
KB 1031 AT S – Two Component: Silver-Filled Cryogenically Serviceable Epoxy System.
Read moreKohesi Bond KB 1031 AT-S is a two component, silver filled, electrically conductive epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. It offers unprecedentedly low volume resistivity (< 10-3 ohm-cm) and remarkably high thermal conductivity.
-
KB 1031 AT-2LO – Two Component: Cryogenically Serviceable And Strikingly Flexibilized Epoxy System.
Read moreKB 1031 AT-2LO can withstand severe thermal shocks and cycling even at cryogenic temperatures. It offers an extensive serviceable temperature range of 4K (-269.15°C) to +120°C. It is a phenomenal adhesive that fosters outstanding physical strength properties and yet consolidates high peel strength and elongation.
-
KB 1031 ATFL-N – Two Component: Nickel Filled Electrically Conductive Epoxy System For Bonding And Sealing.
Read moreKohesi Bond KB 1031 ATFL-N is a two component, highly flexibilized, nickel filled epoxy system suitable for bonding and sealing. It has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. Firstly, it offers very good electrical conductivity and a first-rate peel strength.
-
KB 1031 ATHT-LO – Two Component: Toughened Epoxy System For Bonding, Sealing And Coating.
Read moreKohesi Bond KB 1031 ATHT-LO is a two component, highly toughened epoxy system suitable for bonding, sealing and coating applications. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers excellent peel strength and is capable of passing NASA low outgassing test.
-
KB 1031 SPLV-6 – Two Component: Low Viscosity Epoxy For Bonding, Coating, Sealing, And Encapsulating.
Read moreKohesi Bond KB 1031 SPLV-6 is a two component epoxy system for bonding, sealing, coating and encapsulating. It has a convenient 1:1 (Part A: Part B) mix ratio by weight or volume. This high performance specialty product offers a unique combination of low viscosity, low exotherm and very long working life.
-
KB 1039 CRLP – Two Component: Optically Clear Epoxy System For Cryogenic Applications.
Read moreKohesi Bond KB 1039 CRLP is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1039 CRLP AO – Two Component: Thermally Conductive Epoxy System For Cryogenic Applications.
Read moreKohesi Bond KB 1039 CRLP-AO is a two component, heat curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 100:65 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1040 – Two Component: Room Temperature Curing Epoxy System With Superior Optical Clarity.
Read moreKohesi Bond KB 1040 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to a variety of substrates, such as metals, glass, ceramics, most plastics and rubbers.
-
KB 1040 AN-1 – Two Component: Room Temperature Curing, Thermally Conductive Epoxy System.
Read moreKohesi Bond KB 1040 AN-1 is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers stellar thermal conductivity and is capable of passing NASA low outgassing test.
-
KB 1040 AOHT – Two Component: Room Temperature Curing Epoxy System Offering Excellent Thermal Conductivity.
Read moreKohesi Bond KB 1040 AOHT is an exclusive two component epoxy system suitable for bonding, sealing, coating, potting and encapsulation applications. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers excellent thermal conductivity and an extremely low coefficient of thermal expansion (CTE).
-
KB 1040 CTE LO – Two Component: Room Temperature Curing Epoxy System Offering Very Low CTE.
Read moreKohesi Bond KB 1040 CTE-LO is an exclusive two component epoxy system suitable for bonding, sealing, coating and encapsulation applications. It has a favorable 10:1 (Part A: Part B) mix ratio by weight. Remarkably, it offers extremely low coefficient of thermal expansion (CTE) and is capable of passing NASA low outgassing test.
-
KB 1040 P – Two Component: Room Temperature Curing Epoxy System With Exceptional Bonding To Plastics.
Read moreKohesi Bond KB 1040 P is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable adhesion to plastics like polycarbonates and acrylics among others without any stress cracking.
-
KB 1040 QF – Two Component: Room Temperature Curing, Quartz Filled Epoxy System.
Read moreKohesi Bond KB 1040 QF is a two component, room temperature curing epoxy system suitable for bonding, sealing, coating, potting and encapsulation. It has a favorable 4:1 (Part A: Part B) mix ratio by weight. This unique quartz filled epoxy system offers remarkable adhesion to a variety of substrates, such as metals, composites, glass, ceramics, most plastics and rubbers.
-
KB 1040-2 – Two Component: Low Viscosity, Optically Clear, Room Temperature Curing, Epoxy System.
Read moreKB 1040-2 is a low viscosity, optically clear epoxy system that cures readily at room temperature. In addition, it is capable of passing NASA standards for low outgassing (ASTM E-595). Also, it offers excellent resistance to a variety of acids, bases, oils, fuels and water.
-
KB 10473 FL – Two Component: Room Temperature Curin Epoxy System With Exceptional Flexibility.
Read moreKohesi Bond KB 10473 FL is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable flexibility and peel strength. It readily cures at room temperature and can achieve faster cures at elevated temperatures.
-
KB 10473 FLAO – Two Component: Room Temperature Curing Epoxy System With Exceptional Flexibility.
Read moreKohesi Bond KB 10473 FLAO is a two component, room temperature curing epoxy system suitable for bonding, sealing, potting and encapsulation. It has a convenient 1:1 (Part A: Part B) mix ratio by weight. This unique epoxy system offers remarkable flexibility and peel strength.